产地：日本，品牌：美国

包括：孵育器，中文软件，打印机，酶标仪

该产品由主机、打印机（外置或内置可选）等组成。

酶标板：8 或 12 条形酶标板，96 孔标准微孔酶标板，平底、U 型底或 V 型底；

波长范围：400-750nm；

滤光片：为干涉滤光片、滤光片轮最多可放置 8 个滤光片；

标配滤光片为：415nm、450nm、490nm、
655nm，

备选滤光片：540nm、550nm、570nm、630nm；

测试方法：单波长和双波长。

680 型酶标仪
680 型酶标仪是一种经济的高性能微孔板阅读仪，可根据用户需要灵活地选择配置。自带中文软件提供用户登录、程序与数据的储存、曲线拟合和报告等功能。

特点包括：

能阅读平底、U形底或V形底微孔板或8孔、12孔联管板
阅读前自动校准
宽波长跨度，适于多种应用
速度可调的板震荡功能
容易操作的8 位滤光片轮，每个阅读仪提供 4 个标准滤光片
RS-232 接口用于连接外围PC（带Microplate Manager 软件，Windows 或Macintosh 平台）
设计小巧，外围打印机可通过标准打印接口连接（未安装可选择的内部打印机时）
自带软件或PC 软件包均提供中文界面，同时也提供中文指导手册


Model 680 Microplate Reader
波长跨度： 400–750 nm
光度范围： 0.000–3.500 OD
线性： ±1.0% from 0.000 to 2.000 OD
±2.0% from 0.000 to 3.000 OD
准确度： ±1.0% or 0.010 from 0.000 to 3.000 OD at 490 nm
精确度： 1.0% or 0.005 OD from 0.000 to 2.000 OD
1.5% from 2.000 to 3.000 OD
分辨率： 0.001 OD
滤光片轮容量： 8
读板时间： 6 sec at single wavelength, 10 sec at dual wavelengths
可选配置： Temperature control (5°C above ambient, up to 45°C,
in 0.1°C increments), onboard graphical thermal printer
外形尺寸 (W x D x H)： 34 x 33 x 15 cm (13.4 x 13.0 x 5.9")
重量： 5 kg (11 lb) for basic reader;
5.5 kg (12 lb) for fully loaded reader



Model 680 XR Microplate Reader
波长跨度： 340–800 nm
光度范围： 0.000–3.500 OD
线性： At 340–399 nm, ±1.0% from 0.000 to 2.000 OD
At 400–800 nm, ±1.0% from 0.000 to 2.000 OD, ±2.0% from 0.000 to 3.000 OD

准确度： ±1.0% or 0.010 from 0.000 to 3.000 OD at 490 nm
精确度： At 340–399 nm, ±1.0% or 0.005 OD from 0.000 to 2.000 OD
At 400–800 nm, ±1.0% or 0.005 OD from 0.000 to 3.000 OD
分辨率： 0.001 OD
滤光片轮容量： 8
读板时间： 6 sec at single wavelength, 10 sec at dual wavelengths
可选配置： Temperature control (5°C above ambient, up to 45°C,
in 0.1°C increments), onboard graphical thermal printer
外形尺寸 (W x D x H)： 34 x 33 x 15 cm (13.4 x 13.0 x 5.9")
重量： 5 kg (11 lb) for basic reader;
5.5 kg (12 lb) for fully loaded reader



Operation

Operating panel Membrane keypad with 4 arrow, 7 function, and 11 number keys
Display 4 lines by 20 characters LCD
Self-diagnosis Checks filters, plate transport, electronics, main PC board, battery, memory, and the optional internal printer (when available)
Warm-up time 3 min
Reading speed
Fast read mode
Step read mode
6 sec single wavelength, 10 sec dual wavelength
15 sec single wavelength, 30 sec dual wavelength
Mixing capability 3-speed setting (low, medium, high), programmable time 0–999 sec
Compatible plates Polystyrene flat-, U-, and V-bottom plates, 8- and 12-well strip plates
Assay blanks User-defined or stored assay template
Data storage buffer Last 10 plate data for endpoint, or last 30 plate data for kinetic reads
Report types Raw, absorbance, matrix, limit, cutoff, concentration, curve fit, difference, and kinetic
Internal printer
(optional) Thermal printer with 112 mm paper width, 40 column, 9 x 8/7 (graphic/text mode) dot matrix
Computer interface Bidirectional RS-232C serial communication port, 9-pin D-sub plug
Memory backup 5-year lithium battery



Physical

Optional incubator
Temperature control
Incubator set point
Accuracy
Well-to-well uniformity
Warm-up time
25°C or ambient +5°C, up to 45°C
25–45°C, 0.1°C step
±0.5°C when set point = 37°C at 25°C ambient
±0.7°C when set point = 37°C at 25°C ambient
<5 min when set point = 37°C at 25°C ambient
Electrical voltage 100–240 VAC, 50/60 Hz
Power consumption 100 W maximum
Operating temperature 5–35°C
Storage temperature –20°C to 50°C
Operating and storage humidity 0–95% relative humidity without condensation